1205A MODULATED IRIG DISTRIBUTION
The ptf 1205A is a 12-channel IRIG amplitude modulated time code distribution amplifier housed in a 1U high, 19″ rack package. The ptf 1205A uses an RF design combining the latest technology in low noise components to minimize input/output delays which are of the order of nano seconds.
The unit uses two stages of input signal buffering to distribute the input signal to 12 separate outputs, and insure maximum isolation between individual output signals.
IRIG am Time Code Distribution
Distributes IRIG A, B, D, E, G, & H
High Channel Isolation
12 Channel Output Distribution
Remote Monitoring of Input/Output Levels
Remote Selection of Active Outputs
Dual Input with Auto Switch Option
Low Cost
Convenient 1U, 19" rack mount package
| Electrical | |
| Time Code Output (twelve) | |
| Code Format | IRIG A, B, D, E, G and H |
| Modulation Frequency | 100 Hz - 1 MHz |
| Modulation Ratio | 3 : 1 |
| Amplitude | <6V P-P (into 50 ohms) |
| Connectors | BNC |
| Alarm Output | Summary alarm indicates failure of any output signal |
| Non-alarm condition: | Relay energized (fail safe) |
| Connector | 9 Pin D-male |
| Controls & Indicators | |
| Each Channel | Green/Red LED, Healthy/Fault |
| Input | Manual/Auto Red LED(manual) |
| Keypad | Manual/Auto Channel (A/B) |
| Ethernet | RJ 45, Front Panel |
| RS232 | DB9 (Rear panel) |
| Protocols(Ethernet) | |
| Telnet | |
| SNMP | |
| Web Browser |
| Environmental & Physical | |
| Temperature: | 0° to 55° C |
| Relative Humidity: | 0 to 95%, non-condensing |
| Power Requirements | |
| AC Input (±15%) | 90 - 264 VAC, <10W |
| DC Input (optional) | |
| Dimensions (HxWxD): | 1U x 19” x 16” |
1205A MODULATED IRIG DISTRIBUTION PDF DOCUMENT
