1202A HIGH FREQUENCY RF DISTRIBUTION

The ptf 1202A Hig Frequency RF Distribution amplifier provides high performance frequency references for laboratory or system use requiring distribution at frequencies of 30MHz and above.
The ptf 1202A is especially designed to distribute the high frequency input signal to 12 separate outputs, with minimum signal distortion and maximum isolation between individual output signals.

In most applications the phase noise capibility of the ptf 1202A will outperform the input signal performance to such a degree that no additive phase noise will be noticeable on the outputs.
Isolation output to output is >85 dB and harmonics are <-40 dB. Non-harmonics are <-80dB

• Input Frequencies 30MHz to 400MHz
• 12 High Frequency RF Outputs
• Low Additive Phase Noise
• Isolation (>85dB typical)
• Low Cost Convenient 1U Package

RF Output (twelve)  
Frequency Range 30MHz to 400MHz
  Broadband outputs
Level 1V rms (13dBm nominal)
Harmonic Distortion <-40 dB
Non-Harmonic Signals <-80 dB
Load Impedance 50Ω
Isolation >85 dB*
Connectors BNC

*Isolation alternating channels >100dB

Additive SSB Phase Noise  
(1 Hz Bandwidth) Offset from carrier  
1 Hz -80 dB
10 Hz -105 dB
100 Hz -125 dB
1,000 Hz -140 dB
10,000 Hz -155 dB

RF Input  
Frequency Range 30MHz to 400MHz
Level 1 V rms (13dBm nominal)
Alarm Output  
Summary alarm indicates failure of any output signal  
Non-alarm condition: Relay energized (fail safe)
Connector: 9 pin D-male
Controls & Indicators  
Power Green LED,
power is connected
Alarm Red LED,
signal output failure

ENVIRONMENTAL & PHYSICAL  
Temperature: 0° to 55° C
Relative Humidity: 0 to 95%, non-condensing
Power Requirements  
AC Input (±15%) 90 - 264 VAC, <10W
DC Input (optional)  
Dimensions (HxWxD): 1U x 19” x 16”

Configuration Optio  
Option # Description
DCPS DC Power Supply
RSLD Mounted Rackslides

1202A HIGH FREQUENCY RF DISTRIBUTION PDF DOCUMENT